Furniture. Monday , July 31st , 2017 - 03:43:41 AM
A simple way to improve antique pieces of furniture, such as a chest of drawers, is to fit new handles. The Victorians had a habit of replacing metal handles with round wooden knobs, often leaving the marks of the former back-plates showing. Sets of old handles can be picked up cheaply from antique and second-hand shops but make sure that the back-plates are large enough to cover any existing indentations.
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Assured Quality. Quality assurance is a given in custom furniture as you will be aware about the materials and finish used and its perfection can be obtained, as you are in the process but with store bought furniture you buy a readymade furniture but are not into the whole process.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Best claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.