Sara Holder. Furniture. March 12th , 2017.
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
Uniqueness. Being mass produced store bought furniture will hardly have any difference from one piece to another as it will not be a one of a kind. Owning a customised furniture you will be the only person who has it and will reflect your particular taste on it.
Finding suitable replacement materials for inlay and boulle antiques is an even greater problem. They tend to use more complex and varied materials. Antique and second-hand shops often have boxes containing suitable oddments and it is worth searching through them to find matching pieces. As a last resort, missing pieces of inlay can be built up with synthetic resins or wax, coloured to match. If boulle has lifted seriously or is bent, leave the repair to an expert restorer; but if the lifting is only slight, carefully remove the section and scrape clean all the dirt. Stick with an epoxy resin adhesive and weight it down until the glue has dried.
A storage unit which has wide doors and safe walls between lockers should be chosen. Also, make sure that there are no signs of water damage in any part of the building. Furniture should be kept dry because moisture is the main cause of damage to stored furniture. You should have many thick plastic sheets handy. These sheets should be laid on the floors of self storage units to keep moisture and humidity at bay. Moisture can cause mold growth which is harmful for furniture. Furniture storage can also be done on top of wooden pallets which let the items breathe and save them from moisture.
In today's market place you can find a plethora of reproduced chairs, desks, tables, storage units, lighting, and accessories inspired by the industrial era, but if you truly want an industrial look, try searching for original items that can be found in salvage yards, flea markets and junk shops, and re-purpose them, or use them as is to add a bit of character and drama to a space. Many of today's manufacturers are designing pieces that really bring back the industrial era and while some of these items are pricey, they are great for adding historical character in today's spaces.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Best claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.